VJ-1628MH v1.13

** When updating F/W Main Ver1.12, please make sure to use MSA tool Ver.6.0.6 higher

Bug Fix: 

• A CPU error occurs when connecting to a PC with antivirus software (AVG AntiVirus) installed.
• When restarting printing after an "Obstacle Detection Error" occurs during printing, the CR hits the media and a "E072Err CR Current" occurs.
• When printing data created with Fiery's RIP, missing dots and misaligned printing of specific colors occur.
• If the cover is opened during the soak cleaning countdown, panel key operations will be disabled.

Added: 

• Added a User Copy function to the User Type menu. Copying settings improves ease of use when using similar media.
• Using the printer in a temperature environment outside the guaranteed operating range may cause mechanical problems or physical problems (the ink may change quality or not curing).
  To prevent and suppress such problems, a warning will be displayed on the main panel and on VerteLith and MSM if the printer temperature (temperature information for head 1) falls below 18C or exceeds 45C. If the printer temperature falls within the guaranteed operating range, these warnings will automatically disappear.

Changes: 

• If the ink bag is removed without removing the high capacity ink pack adapter while stirring the ink, the ink end detection flag will react and the ink is out flag will be set.
   Only when the printer is in standby mode and not consuming ink, if the ink pack is removed, "Check ink" will be displayed to prompt the user to check the cartridge status.

Installed Ver 1.12 Serial number:
 VJ-1628MH : JW6U000211~

** When you update to F/W Main Ver1.11, please you make sure to use MSA tool Ver.6.0.4 or higher

Bug Fix: 

• During the ink charge and Longstore the consumption was not recorded on the smart chip in slot 8.

Installed Ver 1.11 Serial number:
 VJ-1628MH : JW6U000173~

Note: When you update to FW 1.10 please make sure to use MSA tool V6.0.1. or higher

Bug Fix: 

• If the printer is turned on with the paper lever up, the MENU key on the panel does not function.
• The remaining print time and length cannot be confirmed on MSM. The printer did not notify MSM of the elapsed time.
• When an ink-related error occurs, the "soak cleaning" process starts, and the panel becomes inoperable during the process.

Added: The ink switching log now records not only when ink is switched, but also when the user mode, self-diagnosis long-term storage, and ink filling are recorded.
* User mode: Initial charge "UC", Long storage "UW"
* Self-diagnosis mode: Initial charge "CH", Long store "LO"

Installed Ver 1.10 Serial number:
VJ-1628MH : JW6U000167~

Note: When you update to FW 1.09 please make sure to use MSA tool V6.0.1. or higher

Bug Fix: There was a problem with the Soak cleaning function.
- Cleaning is executed twice after the setting time display times out.
- If the power is turned off while the CR is moving, the keys on the panel are disabled and the power is not cut off.
- After soaking cleaning is performed, Maintenance > Cap Out does not function correctly.
 - If online data is sent during soaking cleaning, key operations are disabled.

Change: In the previous version a "Longstore" sequence could be canceled while it was running.
 It is now only possible to cancel the sequence in user mode, it cannot be canceled in self-diagnosis mode as before.

Note: When you update to FW 1.07 please make sure to use MSA tool V6.0.1. or higher

Bug Fix:

• Printing may not be resumed when an "Obstacle Sensor Err" occurred during printing: solved.

Installed Ver 1.07 Serial number: 

VJ-1638MH: JW6U000140-