Print to cut with ValueJet to a Summa plotter

Modified on Thu, 24 May, 2018 at 3:03 PM

This PDF documentation in attachment will explain how to make all needed settings when you want to print using a ValueJet and cut the printed file afterwards using a Summa Cutter.

Please be aware that this documentation was written for Illustrator CC 2017 in combination withOnyx 12.1. Other software combinations might work as well, but the procedure might differ.

Items needed information

Make sure all necessary software and firmware is installed.

ValueJet
- Latest firmware
- Up to date RIP software
Summa
- USB driver for the summa cutter
- Illustrator Plug in (Summa cutter tools)
- WinPlot

Before starting

Make sure the printer is in good condition and all nozzles are available
Make sure the step adjust is set correctly
Verify the maximum media size of your cutter (to avoid loading media sizes in your printer which are too large)

Article changes

Rev. 1.0: Initial version

Attachments (1)

pdf

AP-76316_How to_Print to cut ValueJet to Summa.pdf
1.15 MB