TIB707 - VJ-426UF-628-1617H-1626UH-1638UH_New Diaphragm pump

Modified on Thu, 3 Jun, 2021 at 9:58 AM

We added a new spare part to our spare parts list: DG-47098 Diaphragm pump Assy (With Tube).

The waste ink tube which is connected between the diaphragm pump and the fitting cannot be reused when replacing the diaphragm pump Assy. 

However the existing spare parts: DG-43907 diaphragm pump Assy does not include the waste ink tube. Therefor we added the new spare part which includes waste ink tube.

(DG-43907 Diaphragm pump Assy: without Tube)


  • Target model: VJ-1617H/1626UH/628/426UF/1638UH
  • New spare parts: DG-47098 Diaphragm Pump Assy (With Tube)



  • About new spare part “DG-47098”
    DG-47098 comes with 1 piece of waste ink tube with a total length off 200mm. In the table below you will find the required tube length.
    Please cut the tube to the required length and replace the tube when replacing the diaphragm pump.


Reference:


Model
INLET
OUTLET
Total
VJ-1617H
25mm
130mm
155mm
VJ-1626UH
25mm
92m
117mm
VJ-628
24mm
120mm
144mm
VJ-426UF
24mm
120mm
144mm
VJ-1638UH
25mm
165mm
190mm



Article changes

Revision 1.0 : 30 November 2016 - Initial release

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article